Objective:
- I can demonstrate my understanding of computer networks, network operating systems and wireless networking by assembling a directional antenna with the intent of establishing and sustaining a 2.4 GHz wireless signal at a distance of greater than 100 yards.
Links:
Do It Yourself Wireless Antenna (Pringles Can Yagi): https://www.makeuseof.com/tag/how-to-make-a-wifi-antenna-out-of-a-pringles-can-nb/
Building the Cylinder (Can) Waveguide (measurements calculator):
https://www.wikarekare.org/Antenna/WaveguideCan.html
Topics Discussed:
Wireless Networking
802.11 Wi-Fi spec
Directional Antennas
Waveguide Antenna
Yagi Antenna
Assignment:
Today, we will continue the build phase of our directional antenna project. Remember that the goal is to sustain a 2.4 GHz Wi-Fi signal over a minimum distance of 100 yards (300 ft or ~92m).
All tools and equipment are on the metal carts and tables in the front of Room 225. The transmitter testing cart is in the front of Room 225, and the username and password is on a sticky note on top of the cart. Use the velcro strap to secure your can to the tripod and use the tripod handles to angle your can to point at the upright antennas on the target router located on the receiver cart. The receiver cart (with the target router) is in the back of the room, and the username and password is located on a sticky note on the PC case.
Please use this time to make progress on your project. When you are ready for testing, I will set up the testing carts on both ends of the hallway outside my room in the 200 building so we can test all completed antennas to allow those with working products to see the results and modify their designs if necessary. You should have a finished antenna prepared to test at that time so you can tweak the design if necessary before the final test on the week of the 18th!
We will conduct final tests on Monday, December 19th. To be considered a success (and receive credit for the project), your antenna design must be able to sustain at least a -67 dBm wireless signal over a 100 yard distance (the length of the football field).
Reminder: The team (or individual) that produces the antenna that can reliably sustain the highest signal strength (as measured by Signal Quality percentage and Signal as measured in decibels) over the longest distance on the final testing day will receive a personal pizza and wings party, to be held while everyone else writes a three paragraph personal reflection on Wednesday, December 20th describing their participation in this project.
Good luck, and remember: Your antenna doesn’t have to be perfect, it just has to be better than everyone else’s!
Posted: December 5th, 2023
Due Date: December 19th, 2023